- 0원 이상 ~ 50,000원 미만4,000원
- 50,000원 이상 ~ 70,000원 미만3,000원
- 70,000원 이상 ~ 80,000,000원 미만0원
상품명 | 도매_[Louet] 루엣 스피닝휠 S10C DT Classic Irish or Scotch Tension |
---|---|
배송비 | 0원 ~ 4,000원 |
수량 |
월 렌탈 금액 |
월 원 (개월 기준)
|
---|
구매방법 | |
---|---|
배송주기 |
정기배송 할인 save
|
Type | |
---|---|
옵션선택 |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
Louet - S10C DT Classic - Irish or Scotch Tension
클래식한 휠, 아이리쉬 또는 스코티쉬 텐션, 세개의 보빈, 움직이는 후크 방식의 플라이어 그리고 레이지 케이트 랙.
S10 이나 S17같은 루엣의 1세대 스피닝 휠들은 텐션을 조절하기 위한 플라이어 브레이크와 싱글 볼트 보빈 드라이브가 내장되어 있습니다. 그 결과로 스피닝 휠을 처음 접하기에 좋은 모델이 되었고, 두꺼운 얀도 충분히 작업이 가능합니다.
적층처리된 자작나무와 옻칠 마감된 너도밤 나무로 단단하게 설계된 본 모델은, 전문적인 스피너들에게 적합한 모델입니다.
휠에 위치한 구멍은 밸런스 잡힌 플라이휠에 연결되어, 언제든지 작업자가 원하는 위치에서 멈출수 있도록 도와줍니다.
보빈은 세개의 세팅으로 묶여 있어, 세개의 회전비를 골라 작업이 가능합니다.
다른 종류의 보빈과 플라이어를 이용하게 되면 어떤 종류의 얀이나 거칠은 울 또는 파인 실크까지 작업이 가능합니다.
하이 스피드 세팅도 가능하여 파인 얀 작업에도 충분히 사용할수 있습니다. 각각의 휠에는 두개의 보빈이 달린 레이지 케이트가 위치하고 있습니다
좋은 스피닝 휠은 자유롭고 조용히 작동 되어야 합니다.
그래서 본 제품엔 수리가 필요하지 않은 볼베어링이 메인 허브와 풋맨 커넥션에 장착되어 있습니다.(윤활제를 이용할 필요가 없습니다)
휠 : 50 cm (19 3/4")
회전비 : 1:5.5, 1:7.5, 1:10.5
오리피스 : 12 mm (1/2")
높이 : 70 cm (27 5/8")
무게 : 6 kg (13 lb)
사용 가능한 액세서리 :
여분의 보빈
하이스피드 보빈과 그에 맞는 플라이어
하이스피드 팻 코어 보빈
벌키 보빈과 그에 맞는 플라이어
스탠드 얼론 접이식 스키인와인더
네개의 보빈을 위한 조절식 브레이크와 스탠드 얼론 레이지 케이트
두개의 보빈을 위한 여분의 레이지케이트(S10DT 모델에만 포함)
Classic wheel, Irish Tension or Scotch Tension, 3 bobbins, flyer with sliders hooks and Lazy Kate Rack. The first generation Loue?t spinning wheels, like the S10 and S17, all have a single belt bobbin drive with an adjustable flyer brake to regulate tension. This results in spinning wheels that are very easy to learn how to spin on, and also very suitable to spin thicker yarns. Sturdily constructed of lacquered solid beech and laminated birch, it is also suitable for production spinners. The single hole in the wheel leads to a balanced flywheel, which ensures, that the wheel always stops in the place where you stop. The bobbins have a sheave with three settings that can be used to obtain three spinning speeds or ratios. By using different types of bobbins and flyers, Loue?t spinning wheels can be used to produce every kind of yarn, from coarse wool to fine silks. Each wheel comes equipped with a two bobbin lazy kate. A High Speed Set is also available for this wheel for easier spinning of very fine yarns. Finally, an excellent spinning wheel must turn freely and quietly. Accordingly we use maintenance-free ball bearings in the main hub and at the footman connection. (No lubrication is required). The spinning wheels are disassembled to the extent that they can be packed flat and shipped economically. The assembly consists of tightening two nuts for which tools and instructions are included. Specifications: - Main wheel: 50 cm (19 3/4")
- Ratios: 1: 5.5, 1:7.5, 1:10.5
- Orifice:12 mm (1/2"), height from the ground 70 cm (27 5/8")
- Weight: 6 kg (13 lb)
Accessories available:
extra bobbins
high speed bobbin and matching flyer
high speed fat core bobbin
bulky bobbin and matching flyer
stand-alone foldable skeinwinder
stand-alone lazy kate with adjustable brake for four bobbins
extra lazy kate for two bobbins (for S10DT only)
+ 본재품은 해외제작의 핸드메이드 도구 및 제품입니다. 취소시 당일 취소만 가능하며 배송준비 상태이후에는 취소, 교환, 환불 불가 상품입니다.
+ 룸 형태의 모든 재품은 조립전 상태로 도착하여 직접 조립해 사용하시는 제품입니다. 설치,조립을 추가 요청할 경우 견적에 따른 비용은 별도 입니다.
게시물이 없습니다
게시물이 없습니다